All Products

Aluminum 8mm insulated lightning down conductor confirming to IEC-62561-02. LPES-211115-01.

High Tensile Round to Round Connector for conductor Ø 8-10/Ø 18-20 mm. connections "+", "T", "T", ll ". It consists by 3 plates St-St, thickness of intermediate plate 2 mm. Usage above and under ground per IEC-62305.Complies as per IEC-62561-1. Part No. LPES-161413-01.

Brass Rod to Flat Clamp with SS Bolt

Earthing Pit Cover 6'' Roud Bucket Type

Copper

Copper

M&L Environment friendly, RoHS certified, low resistivity Ground Enhancement material in sealed container of 30LBS / 13.6 Kg pack to fill the bore area around the rod complete all as specified and directed. LPES Part No- 191612

150 X50x1.6 mm GI perforated cable tray with mounting accessories and cover.

Elmex Make PV Solar Straight connecter

Installation of LPS System as per IEC-62305

8mm Al Lightning Conductor

SS Wall/RCC/Brick Lightning Conductor Holder

Al Expansion Piece 8mm

Testing Link with Encloser

Copper Rod,Roksfill,Bentonite and Watering Pipe

GI B class Earthing Pipe with Funnel and Clamp.

ESE AIR TERMINAL New Generation pulsed Excitation Lightning Head with enhanced ionization System. Latest Tested -2011 It gives 48 Mtr. Radius of Protection at standard level 1 and 71 at level 4 when Installed at 5 mtr. mast height of From the surface. -Technical Characteristics •Non-Electronic ESE • Designed & tested as per NF C 17-102 (2011) standard • ΔT = 60 μSec (Triggering Time Advance Delta T) • 100 KA (10/350 μSec) lightning current & 200 KA peak current tested in HIZAL (Turkey, Europe) lab • No use of batery or external power source • 304L (Inox) Stainless Steel design— suitable for any environmental conditions • Suitable for use with a variety of down conductors— tape/strip, round conductor, isolated / insulated cables / HVSC cable, etc Testing & Certificates • HIZAL (Turkey, Europe) lab METU.

Supply of Highly durable Mast of Height 5 Mtr. GI Mast as per IS-1239 & IS 3589 with Base plate, GI (Mhadev make)Supporting wires and accessories. All the components should be as per IS 1239 & IS 3589 Standard

Hot Dip Galvanized Estimated Weight 2.400kg/mtr

99.9 % Pure Copper-Soft ETP Density Apprx. 6.86

76x3000mm GI Chemical Earthing Electrode with inner Copper strip of 50x6mm Both side Terminal

DIN rail, Type 2 /Class Ⅱwith anti-vibration pluggable module for use in a.c. TNC or IT system at boundaries from LPZ 0B -1 and higher. Feature  Non-destructive screening technology for MOV  Reliable thermal disconnect device  High discharge capacity  Consisting of a base part and pluggable modules  Easy replacing and anti-vibration due to module releasing and locking system  Visual and remote status indication  Multifunctional terminals for connecting conductors and busbars  DIN rail installation

6 Digit Lightning Strike Counter Make -Onay.

Conductor Holder for Parapet (Brick RCC)- conductor holder according to DIN EN 62561-4 (VDE 0185-561-4) Supply of Nylon Parapet / bricks wall Holder for 8 / 10 mm round conductor, to meet the requirements for IS/IEC 62305. and should be tested for its as per IEC 62561. LPES-PWCH8 Number: LP101113 Make- LPES-Le.

LPES –SSMSCC8 Metal Kalzip Sheet Conductor Holding Clamp. Sheet Roof conductor support aluminum V2A, Ø 8 mm, type B for laying round ladders on the Kalzip roof system, version with stainless steel clip snap-on holder Material conductor holder: stainless steel V2A Pipe height: 50 mm Fit conductor holder: Ø 8 mm Cable routing: loose, type B Number:102123 LPES –SSMSCC8 Make- LPES-Leo,

LPES –PMSCH8 Plain Metal Sheet Conductor Holder conductor holder according to DIN EN 62561-4 (VDE 0185-561-4. Supply of Metal roof conductor holder for fixing Aluminum conductor on the metal sheet/surface to meet the requirement of IS/IEC – 2305.For sheet as specified in drawing , Bottom section stainless steel (V2A) with Ø 8.5 mm slot made of Conductor holder of polyamide LPES –PMSCH8 Number: LP101143 Make- LPES-Leo

Hot dip Galvanized GI Strip for Earthing. App. Weight 8.520 kg @ 56.50

GI Strip Appr. Weight 1.9/kg =107.35

Solar Structure Mounting Franklin/ Lightning rod designed as per IEC-62305 made up of Aluminium Alloy Conforming to IEC-62561. Dia- 10mm, Length 1050mm Shape bend 60 degree .Welded Clamp of 70x30x2.8mm.

Ring/Down/Earth Conductor-P100128 Round wire Cu soft F22, cut for use with lightning protection systems for Earthing ring/Down /Vertical/Earth Conductor DIN EN 50164-2 (VDE 0185-202) Material: Copper Bonded E-Cu, soft F22 Diameter: 10 mm Cross section: 70 mm ²: LPES-CUC8 Number: LP100 129. Make- LPES

Straight Conductor Connector Supply of SS straight conductor contraction of Solid Round Al/Cu/GI/MS Conductors of 70sq.mm as per drawing, components are to meet the requirements for IS/IEC 62305.Tested for its Electrical, Mechanical and Chemical properties as per IEC 62561. Number-108154 .Make- LPES

conductor holder according to DIN EN 62561-4 (VDE 0185-561-4. Supply of RCC Flat Roof Conductor Holder at every one metre for 8 / 10 mm round conductor to make horizontal Air terminal at RCC terrace to meet the requirements for IS/IEC 62305 Number: LP101123 OR Number: LP101113+104143 LPES- CFCH 8 Make LPES

UL Listed 14.2x3000mm Copper Bonded Rod with Electrolytic copper Coating of more than 250 Micron.

100 Mtr.

Air-termination rod of diameter 10 mm, length- 1000 mm, of material- aluminium chamfered on both ends, Complied as per EN 62561-2 complete all as specified and directed.Part No.-141313-100

Air-termination rod of diameter 10 mm, length- 1000 mm, of material- aluminium chamfered on both ends, Complied as per EN/IEC 62561-2 complete all as specified and directed LPES Part No 141313-100

Air-termination rod Holding clamp for RCC Wall/ Parapet/Side Sheet.Material-StSt with clamping range of the Rd 8-10 mm, Complied as per Standard EN 62561-1 complete all as specified and directed. LPES Part No. 141617-001

MV Clamp (Multipurpose connecting clamp) of Material- St/tZn, With clamping range Rd 8-10 mm & Standard EN 62561-1 complete all as specified and directed. LPES Part No. 162211

Model 6P.14.8.320.1012 finder with Acessries in IP65 Enclosed.as per Technical Specifications.